How to lift with eye bolts: The right way to do it

Last Updated

Table of Contents

Lifting is a popular workout that helps tone muscles and builds strength. It involves lifting heavy objects to increase lifting capacity. Lifting with eye bolts is an essential part of this workout. You should use the right type of eye bolts and lift the correct weight limit when lifting with eye bolts.

Using eye bolts incorrectly can harm your body and the objects around you. Read to find out how to lift with eyebolts correctly and what you should avoid when lifting with them.

How do you lift with eyebolts?

– Select the right eyebolt for the job.

– For example, an eye bolt should have a minimum diameter of 0.20″ and a length of 7″ to 10″ for use in steel framing.

– Inspect the eyebolt for any signs of wear or defect before use.

– Make sure the bolt is secure and doesn’t move during the lift.

– Also, check the washer for cracks or signs of wear. If necessary, replace the washers with new washers of the same size and material as the original washers.

– Finally, keep your body clear from the path of travel of the load being lifted. This will minimize unnecessary strain on the structure and prevent it from being compromised.

– Always use a lifting sling properly rated for your lifting load. This will help ensure that you don’t overextend yourself or your body while lifting heavy objects.

Eye Bolt Types

Eye bolts are one of the most common types of fasteners. They are used to secure objects or fittings to a surface in a manner that is stable and secure but easy to access and remove. Eye bolts come in a wide range of shapes and sizes, with single-shoulder eye bolts being the most common type. Designed for use with support angles and structural channels, single-shoulder eye bolts provide a stronger grip than single-shoulder eye bolts and can be used in lifting and pulling applications where a wide range of motion is needed.

Other eye bolts include screw-eye bolts, which can be used for simple installation in pre-drilled holes or other tight spaces, and swivel eye bolts. Ideal for lifting and pulling applications when a wide range of motion is needed, swivel eye bolts provide a secure hold on the object being lifted or pulled without compromising the safety of the user or the object being lifted or pulled.

How should you select the right eye bolt?

When it comes to lifting with eye bolts, you should consider a few things. The weight of the load you are lifting will be one of them. You can check the eye bolt’s capacity and the load rating to know the limit of its strength. Another factor to consider is the material of the eye bolt. Choose an eye bolt made from strong material such as steel or stainless steel. Other features include thread type and size, shank length, and finish. These features help ensure the eye bolt provides optimal support and durability for your lift. By considering these factors, you can select an eye bolt that best suits your needs and safely lift heavy loads.

What should you avoid when using eye bolts?

When using eye bolts, it’s important to follow safe practices and avoid excesses. When designing a load-bearing structure, the working load limit of an eye bolt should always be considered. This is the maximum load the eye bolt can safely withstand without being damaged or deformed.

Avoid using a damaged or worn eye bolt, as it could lead to hardware failure and possible injury to personnel or damage to property. In addition, make sure to use the correct eye bolt type for your application. Select eye bolts with high corrosion resistance and minimum operating temperature for safe use. Lastly, always check the diameter of the eye bolt hole before installing it and ensure it is large enough for the bolt diameter.

Related Articles:

How to remove bolts
How To Use Toggle Bolts

How Much Weight Will Eye Bolts Hold?

– Know the weight rating of the eye bolt before attempting to lift it.

– Ensure that the eye bolt is securely fastened before attempting to lift it.

– Utilize a spreader bar or chain to distribute the load across multiple eyebolts for heavier loads.

– Use an appropriate sling and other rigging hardware when lifting with eye bolts.

When lifting heavy objects, it is essential to use proper equipment and techniques to ensure the safe lifting of the object and avoid any chance of injury or damage to yourself or the object being lifted. One of the basic pieces of equipment used in lifting heavy objects is eye bolts. The size of the eye bolt varies depending on the weight of the object being lifted. However, you must know the eye bolt’s weight rating before lifting heavy objects as per specified guidelines. A few tips on how to lift with eye bolts will help you achieve safe and efficient lifting of heavy objects.

Frequently Asked Questions

How can I ensure the proper installation of eyebolts for a secure lift?

To ensure the proper installation of eyebolts for a secure lift, follow the steps below:

1. Choose the right eyebolt with the correct diameter and length for your lifting needs. Make sure that it is rated to hold the weight of the load you intend to lift.

2. Eyebolts should always be installed in a straight line, parallel to the direction of the lift. This will make sure that the load is evenly distributed when lifted.

3. Use washers between the eyebolt and the surface you are mounting it on, such as steel or concrete, to prevent damage from friction caused by tightening bolts.

4. Use quality hardware such as nuts and bolts to ensure a secure connection between the eyebolt and the surface.

5. Always use a load test before using the eyebolt for a lift; this will help you make sure that it is fit to carry your load safely.

What is the maximum weight capacity of eyebolts, and how can it be calculated?

The maximum weight capacity of an eyebolt depends on the size of the bolt, the material it is made of, and its safe working load limit (SWL) or ultimate tensile strength (UTS). Eyebolts with a larger diameter and made of stronger materials can handle heavier loads. Manufacturers usually specify a safe working load limit (SWL) and ultimate tensile strength (UTS) for their bolts which should be used as a guide when calculating the maximum weight capacity.

It is important to remember that even if the eyebolt appears to be strong enough for a certain load, never exceed the specified SWL or UTS to ensure safety.

What is a swivel hoist ring?

A swivel hoist ring is a lifting tool that provides a secure connection between the crane and the load. It is designed to rotate 360 degrees in any direction and is typically used for overhead lifting or suspending loads from an overhead structure. The swivel hoist ring has a built-in safety latch that prevents accidental load release, making it safer than other lifting devices. It can be used with either manual or powered cranes, and its swiveling design allows it to be adjusted to any angle and ensures easy access to the load. Swivel hoist rings are a versatile piece of equipment used for almost any lifting application, including construction, manufacturing, maintenance, and repair work. They are also relatively lightweight and easy to install and maintain.


While lifting with eyebolts to support rigging is common, safety should always be the top priority. Follow the above tips to use eye bolts safely and lift them efficiently. When using eye bolts, it’s essential to check their load-bearing capacity against the total weight of the object they’re lifting. You should always read the packaging of the bolts carefully before use and follow the instructions given by the manufacturer to ensure optimal performance.